provide Best Quality

Antistatic and ESD Control

Anti Static Aprons

Anti Static Floor Cleaning Solutions

Anti Static Gloves

Anti Static WristBand

Antistatic Bubble Bags

Antistatic Chair

Antistatic Fabric

Antistatic Finger cot

Antistatic Foam

Antistatic PE Bags

Antistatic PVC Mat

Antistatic Slippers

Antistatic Spray

Antistatic Utility Tapes

Common Ground point

Earth Bonding Plug

ESD Safe Field Service Kit

Ground Cord's

Static Control Heel Grounder

Static Dissipative PU Shoes

Static Shielding Bags


 

Anti Static Aprons :

Specifications

   
Composition : Polyester filament yarn with conductive
Material : 100 % Polyester
Colour : Blue / White
Surface restivity on the cloth : Less than 10 Degrees
Static charge generation : Less than 200 Volts
Rate of decay : < 2 sec
Electro Conductive Yarn : Carbon
Air Permeability (CC/Cm²/Sec  ) : 9.3
Moisture Permeability (gr/m²/24 hrs)  : 7.156

 

 

AntiStatic Floor Cleaning Solution :

 Antistatic Floor Cleaner is specially designed liquid cleaner for the purpose of washing the Antistatic / Conductive PVC floors. Floor cleaner is neutral in PH Value with no ionic residues left behind after the floor is cleaned using the liquid.  Anti static floor cleaner has disinfectant characteristics for hygienic reasons.  Specially of this liquid is its capabilities to meet the demands of the static control measures in Electronic and related applications.

  1. Aqueous based liquid supplied as concentrate.
  2. Diluting medium, preferably deionised water or clean water
  3. PH value is 6.5 to 7.5
  4. No ionic contaminates.
  5. Surface resistance of cleaned surface is 109 to 1011Ohms/Sq
  6. Shelf life – 6 months from the date of manufacture.
  1. May be diluted using  clean water up to 20 times the volume of the concentrate depending upon the dirt on the floor and static requirement.
  2. The diluted solution to be used as a floor cleaning agent with normal floor cleaning methods.
  3. Best results are obtained when hot water at 50 – 60 C is used for diluting and cleaning.

 

 

AntiStatic Gloves :

 Antistatic Floor Cleaner is specially designed liquid cleaner for the purpose of washing the Antistatic / Conductive PVC floors. Floor cleaner is neutral in PH Value with no ionic residues left behind after the floor is cleaned using the liquid.  Anti static floor cleaner has disinfectant characteristics for hygienic reasons.  Specially of this liquid is its capabilities to meet the demands of the static control measures in Electronic and related applications.

  1. Anti Static non-slip gloves
  2. Made from 100% polyester, continuous less-linting filament knitted with carbon fiber and PVC dots on palm for better grip on precision components and parts,
  3. PU coating on palm side ensures better grip
  4. Back of glove made from low linting polyester with carbon fiber for ESD protection
  5. Excellent sweat absorbency and good ventilation
  6. Sizes : Small, Medium, Large

 


AntiStatic Wrist Band :

Specifications

   
Resistance : 1 Meg ohm
Resistor film : ¼ watt, 1 Meg ohm carbon
Insulation : Polyvinyl chloride extruded
Colour : Blue
Wrist Band
22 CMS Conductive Fiber Woven elastic band with Velcro fastners.  Contact plate through 316 grade stainless steel, adjustable.
GROUNDING CORD
Wire Dia : 3 mm +/-0.1mm
Coil Dia : 8 mm +/-10%
Insulation : PVC
Banana Plug Dia : 4 mm

Moulded contact Button, Banana Plug + Crocodile Clip Length

: 2 Mtr in expanded state

 

 

Antistatic Bubble Bags :

This bag is specially designed to provide protection for contents from being damage physically and electrically during handling and shipping.
Surface resistivity : < = 1011 W / (ASTM D257)
Surface resistance : < = 1010 W (EOS/ESD S11.11)
Static decay :  < 2 sec (FTMS 101C, Method 4046)

 

 

AntiStatic Chair :

Anti static chair is essentially designed for discharging the accumulated electrical charges for the operator during critical electronic assembly.

Height adjustable.

SPECIFICATIONS :

 

Surface Resistivity of seat & back: 106 – 109 Ohm/ Sq
Surface  Ground 106 – 109 Ohm

Revolving.
With Antistatic cushioned seat & back.
Conductive castor wheels.
Arm rest available as optional.
Elegantly painted / plated for durability.

 

 

Antistatic fabric :

Composition

98% Polyester filament yarn 2% Carbon filament yarn

ASTM-D-629
Weave 2/1 twill, 5mm grid  
Weight 170 g/y (122 g/m²) ± 5%  
Width 60 inch (152cm) ± 2%  
Density

Warp: 188 ends / inch (74 ends/cm) ± 5%

Weft: 94 ends / inch (37 ends/cm) ± 5%
 
Yarn Type

Warp: Polyester 100D/36F; Conductive yarn

Weft: Polyester 100D/36F; Conductive yarn
 
Surface Resistivity 10 6-7(42%R.H., 21˚C) ohm/square DIN 54345
Friction Charges

Warp: 39V, Weft: 27V

JIS L1094-B
Decay Time ± 0.01 (42%R.H., 21˚C) sec NFPA-99
Air Permeability 4.0 c.c/cm²/sec JIS L1094-B
Tear Strength Warp: 2.5 kg
Weft: 1.9 kg
ISO 5082 : 1982-1”grab test
Tensile Strength Warp: 63 kg
Weft: 70.6 kg

ISO: 9290 : 1990-falling

Pendulum method B
Color Retention

After water washing   4-5 grade, After wet friction   4-5 grade, Light fastness   4-5 grade, After dry friction 4-5 grade

ISO 105 C03-30min
ISO 105 D01 : 1993
ISO 105 E01 : 1994

ISO 105 B02 : 1994
Filtration Efficiency

0.3 m m (52%)
0.5 m m (57%)
1.0 m m (75%)

5.0 m m (78%)
 

 

 

Antistatic Finger cot :

Washed under a controlled process to remove particles and reactive ions (Na+, K+, Ca2, Mg2, Nz2+, Cl, SO42)

Surface resistivity (109 to 1011 Ω/sq) suitable for handling of Class II, Category B (100V) ESD
Suggested for Class II (2000 3999V) static sensitive devices
Ultra low powder cot surface minimizes particulate contamination

Ultra low levels of extractable and residual ions prevent product failure

Packing done in clean environment

 

 

Antistatic Foam :

Inexpensive Foam with Antistatic property designed for general packaging and cushioning functions in ESD sensitive area.

 

 

Antistatic PE Bags :

This product comes in clear transparent or pink transparent to provide visibility of packaged items. Other colours also available upon customers’ request.

Optional feature: Zip-lock design
Material thickness : 4 mils (0.1mm)
Surface Resistivity :£ 1 x 1011 Ohm/sq. (ASTM D257)

Surface Resistance: £ 1x 1010 Ohm  (EOS/ESD S11.11)

Static decay: < 2 sec (FTMS 101C, Method 4046)

 

 

Antistatic PVC Mat :

Material : Homogeneous composition with black Conductive layer sandwiched between Two antistatic layers
Thickness : 2mm +/- 0.1mm
Flexibility : Does not break, crack or show any Sign of failure
Sound Reduction Factor : 3 db for 2 mm thickness
Inflammability : Self-extinguishing
Water Absorption :

At room temperature for 24 hours is Less than 0.1%

Color : Grey /Blue
ELECTRICAL PROPERTIES:    
Surface Resistivity : 107–109.Ohms /sq
Decay Time : Less than 2 seconds

 

 

Antistatic Slippers :

This slipper provides effective and reliable way to remove static charge. This one-piece sole design allows human body static charges to dissipative via the insole to the floor. This design does not utilize any copper foil for adhering the insole to the outer sole for electrical conductivity.

 

• Excellent durability and comfort

• Single Piece Molded Sole

• Marked with ESD caution logo to distinguist from normal footwear

• Economically priced

Materials :

Sole : Static Dissipative PVC

Top : PVC

Surface Resistivity : Sole : 1.0 × 10E9 to 1.0 × 10E11 ohm/sq
Resistance to ground :

<1.0 × 10E11hms

Color : White
Sizes :

240, 250, 260 and 270 mm

 

 

Antistatic Spray :

Static Electricity, accumulated on surface like Monitors, Mobile, work surfaces, carpets, etc., can be the cause for ESD failure, as also attracts dust and contamination. Antistatic spray or solution, when applied would create a conductive path on that inaccessible surface discharging the static charges temporarily affecting for approximately 48 hours depending on the usage.

SPECIFICATIONS

 

Medium -Solvent (IPA) Base - Aqueous Based
Application -Aerosol Spraying
Surface Resistivity - 109 to 1011Ohms/Sq
Shelf Life -6 Months - 6 Months

 

 

Antistatic Utility Tapes :

This polyester film antistatic coating tapes do not generate static within the decay rates of MIL B-81705. It is clear and having the acrylic adhesive that is commonly used in shielding package for semiconductor and electronic components.

Features

 

• Size: 6 mm x 50 m, 25 mm x 50 m, 50 mm x 50 m

 

 

COMMON GROUND POINT :

As per ANSI/ESD S20:20 all conductors including Personnel must be electrically connected and attached to a known ground.

Anti-static work station operators need a convenient method of grounding their wrist straps where the ground cord won’t get in the way of their work. This Common Ground Point brings all the connections (buttons & sockets) to the same potential before grounding.
FEATURES :
M.S powder coated is designed to mount under bench, saving work surface space.
Two meter grounding cable, at one end LUG provided for attachment to ground.
1 Meg Ohms resistance is optional for CGP.

 

 

EARTH BONDING PLUG :

ESD EARTH BONDING PLUG is designed to provide safe, effective and easy to use in earthing point in an ESD protected area (EPA). The plug fits in to the mains supply socket, making a connection with the earth conductor only. In place of the Line & Neutral pins are molded insulating plastic pins to allow positive location in the socket. Banana Sockets & Button are provided for the various elements such as table Mat, Floor Mat, Wrist Strap & Grounding Cords etc..

The normal earth pin is linked with 1 Meg Ohms resistor to the banana sockets & button to limit the reverse current from the earth.
SPECIFICATIONS :
Colour : Black
Box Size : 48 x 38 x 18 mm
Weight : 25 Gms
Safe Resistance value : 1 Meg Ohms

 

 

ESD Safe Field Service Kit :

Features:

This Portable Field Service Kit provides effective static protection in a compact package for the electronic field technician. The entire kit folds to a size that fits easily into most tool cases. The two pockets sewn into the work mat provides storage for coiled cords and wrist band.SPECIFICATIONS :Colour:BlackBox Size:48 x 38 x 18 mmWeight:25 GmsSafe Resistance value:1 Meg Ohms

 

 

GROUND CORD :

Every Antistatic table mat and ESD Table top laminate requires grounding cord for grounding. Our GC-01, GC-02 & GC-03 is specially designed for the grounding purpose.

 

GC -01 Features:-

Two meter standard copper wire ground cord.

both sides 10mm female snaps for easy attachments to mats.

GC -02 Features: -

Two meter standard copper wire ground cord.

Includes 10mm female snap for easy attachments to mats.

Built in 1MΏ, provides a safe level of isolation from being grounding directly. Lug/Crocodile clip can be provided at the end of cord for attachment to earth.

GC -03 Features: -

Two meter standard copper wire ground cord.

Includes 10mm male and female snaps for easy attachments to mats and additional groundings.

Built in 1MΏ, provides a safe level of isolation from being grounding directly.

 

 

 

Static Control Heel Grounder :

This reusable heel grounder is made of conductive rubber with an adjustable hook and loop strap and conductive polyester ribbon for body contact. It provides safe and reliable grounding between mobile personnel and conductive flooring. Specification : Ribbon to cup resistance (@100 V) 1 x 106 -1 x 107 W For mobile personnel when wrist straps are not practical Heel Grounder must be used with properly grounded floors Use Heel Grounders on both feet for proper grounding

 

 

Static Dissipative PU Shoes :

Features

This shoe has a two-piece construction of PU top material and a unique one piece molded static dissipative PU sole. This one-piece sole design allows human body static charges to dissipate via the insole to the floor. This design does not utilize any copper foil for adhering the insole to the outer sole for electrical conductivity.

• Single Piece Molded Sole

• Excellent Electrical Properties

• Non-Marking, Non-Slip Sole

• Machine Washable

• Better Cushion at insole and heel portion

Specifications:-
Materials :

Top : PU

Sole : Static Dissipative PU

Surface Resistivity : Sole : 1.0 × 10E7 to 1.0 × 10E10 ohm/sq
Resistance to ground :

1.0 × 10E6 to 1.0 × 10E9 ohm

Color :

Top : White

Sole : White

Sizes : 220, 225, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 280, 285, 290, 295 and 300 mm

 

 

Static Shielding Bags :

Features : Our Static Shield bags are made from high quality antistatic metallized film which provides optimum protection for your ESD sensitive products. The 3.1 mil thick material offers superior durability.

• Creates a Faraday cage effect to protect your products from electrostatic discharge.

• High quality material provides excellent protection from punctures and tears.

• Polycarbonate Compatible, contains no Amines, Amides or N-Octanic Acid.

• Fast delivery for any custom sizes.

• Printed with ESD awareness logo and date code for traceability.

Specifications:-
Materials :

Top : PU :: Sole : Static Dissipative PU

Surface Resistivity : Sole : 1.0 × 10E7 to 1.0 × 10E10 ohm/sq
Resistance to ground :

1.0 × 10E6 to 1.0 × 10E9 ohm

Color :

Top : White :: Sole : White

Sizes : 220, 225, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 280, 285, 290, 295 and 300 mm